What Does a Clock Spring Do in a Car?

A clock spring is a type of torsion spring that winds and unwinds as the steering wheel is turned. It is used to keep the electrical connection between the airbag and the vehicle’s battery intact while allowing the airbag to deploy when needed.

A clock spring is a vital component in many modern cars. It allows the steering wheel to return to its original position after being turned. Without a clock spring, the driver would have to manually return the wheel to the center position each time they made a turn.

This could become very tedious and dangerous over time! Clock springs can be found in both manual and automatic transmission vehicles.

How Do You Break a Clock Spring?

When a clock spring, or mainspring, breaks, it can be very frustrating. You may have heard that you should never try to repair a clock spring yourself, but with the right tools and some patience, it is possible to fix a broken clock spring.

Here are some instructions on how to break a clock spring:

1. First, you will need to remove the back plate of the clock. This will give you access to the inner workings of the clock.

2. Once the back plate is removed, locate the brokenclock spring.

It will likely be tangled up with other parts of theclock mechanism.

3. Carefully untangle the broken clock spring from theother parts of the mechanism. Be careful not to damage anyof the other parts in the process.

4. Once you have isolated the broken clock spring, usea pair of pliers to carefully unwind it from its housing.

How to Fix a Clock Spring?

When it comes to repairing a clock spring, there are a few things you will need to keep in mind.

First, you will need to identify the problem. If the issue is with the winding mechanism, then you will need to replace the entire clock spring.

However, if the problem is with the mainspring, then you can simply replace that component. Once you have identified the problem, you will need to gather the necessary tools and materials.

For this particular repair, you will need a screwdriver, a hammer, and pliers.

You may also need some lubricant depending on the severity of the issue. With all of your materials gathered, it’s time to start disassembling your clock. Begin by removing any screws that are holding everything together.

Once everything is unscrewed, carefully take apart each piece until you reach the broken component.

At this point, you can either replace or repair the damaged part before reassembling your clock. If you followed these steps correctly, then your clock should be as good as new!

Clock Spring Symptoms?

If you’re experiencing any of the following clock spring symptoms, it’s important to have your vehicle checked out by a qualified mechanic as soon as possible. Clock spring problems can cause all sorts of safety issues while driving, so don’t take any chances!

1. Your steering wheel feels loose or “sloppy” when turning.

2. The airbag warning light is illuminated on your dash.

3. You hear a strange clicking noise coming from your steering wheel area when turning.

4. You notice that your steering wheel isn’t returning to the center position after making a turn.

Does the Clock Spring Affect the Turn Signals?

The clock spring is a vital piece of your car’s electrical system. It ensures that the turn signals work properly by providing power to them. If the clock spring fails, the turn signals will not work.

This can be very dangerous, as other drivers will not be able to see your signal and may not know which way you are turning. Clock springs typically last for the life of the vehicle, but they can fail prematurely if they are damaged or defective.

If you suspect that your clock spring is failing, take your car to a mechanic so that it can be repaired or replaced.

Can I Drive With a Bad Clock Spring?

A clock spring is a crucial component in your car’s steering system. It allows the airbag to deploy in a crash and keeps the electrical connection between the steering wheel and the car’s column.

If your clock spring is damaged, it can cause problems with your car’s steering and airbag systems.

Here’s what you need to know about driving with a bad clock spring.

If your clock spring is damaged, it can affect the performance of your car’s steering and airbag systems. Steering may feel loose or unresponsive, and the airbag may not deploy in a crash.

Driving with a damaged clock spring is not safe and should be avoided. If you must drive with a damaged clock spring, be sure to have your steering and airbag systems checked by a qualified mechanic before hitting the road.

Can You Drive a Car With a Bad Clock Spring?

If your car’s clock spring is broken, you will not be able to drive the car. The clock spring is a vital part of the car’s steering system, and it allows the driver to turn the wheel while maintaining contact with the airbag. Without a working clock spring, the airbag will not deploy in the event of an accident.

What Does a Bad Clock Spring Cause?

A bad clock spring can cause a number of problems in your car. The most common problem is that it can cause the steering wheel to become misaligned. This can make it difficult to steer your car in a straight line.

Additionally, a bad clock spring can also cause the airbag light to come on. This is because the clock spring is responsible for sending a signal to the airbag module when the ignition is turned on.

If the clock spring is not working properly, then the airbag light will come on as a warning to the driver that there could be an issue with the airbags deploying correctly in an accident.

In some cases, a bad clock spring can also cause problems with the horn not working properly.

How Does a Clock Spring Work?

A clock spring is a type of torsion spring that winds up when the clock is wound and stores energy to run the clock. The energy is gradually released as the spring unwinds, turning the gears as it does so.

This type of spring was first used in clocks in the 14th century, and its use has since spread to other applications such as watches, music boxes, and toys.

How Do You Reset a Clock Spring?

If your car’s clock spring is broken, you’ll need to replace it.

Here’s how:

1. Remove the battery negative cable.

2. Disconnect the electrical connector from the clock spring.

3. Pry out the old clock spring with a flat-head screwdriver. Be careful not to damage the airbag module.

4. Insert the new clock spring into place and reconnect the electrical connector.


A clock spring is a type of torsion spring that allows for the constant tensioning of a wire or cable within a device. It is commonly used in devices such as clocks, where it allows the hands to rotate without the need for winding.

In cars, clock springs are used to keep tension on the steering wheel so that it can return to its original position after being turned.

Danyl Dmitry

Leave a Comment