Strut spacers are used to raise the vehicle body, while coil spacers are used to alter the suspension geometry. Both can be used to achieve a similar goal of lifting the vehicle, but each has its own advantages and disadvantages. Strut spacers are typically easier to install than coil spacers, and they don’t require any disassembly of the suspension.
However, they can cause problems with steering alignment and increased wear on suspension components. Coil spacers may be more difficult to install, but they don’t affect steering alignment and generally cause less wear on suspension components.
There are many factors to consider when lifting your truck. Two common methods are coil spacers and strut spacers. Each has its own set of pros and cons that should be considered before making a decision.
Coil Spacers:
Pro:
- Can be used with stock shocks
- Provide a smoother ride than strut spacers
- Can be used to achieve a level stance
Cons:
- More expensive than strut spacers
- Can cause clearance issues with suspension components
- Installation is more difficult than strut spacers
Strut Spacers:
Pros:
- Inexpensive compared to coil spacers
- Easy to install
- Good for small lifts
Cons:
- Shocks must be replaced
- Less ride quality improvement over coil spacers
Con : Will not provide a level stance by themselves
If you are looking for a small lift and an easy installation, strut spacers may be the way to go.
If you want a smoother ride and don’t mind spending a little extra, coil spacers may be the better choice.
Ultimately, the decision comes down to personal preference and what you hope to achieve with your truck lift.
Difference between Strut Spacer Vs Lifted Strut
There are many benefits to lifting your vehicle. It can improve ground clearance, allow for larger tires, and give you a better overall look. But it also comes with some trade-offs, one of which is a rougher ride.
That’s where strut spacers come in. Strut spacers are devices that fit between the body of your car and the struts. They act as a buffer, absorbing some of the impact from bumps and potholes so that your ride is smoother.
Lifted struts, on the other hand, actually raise the height of your car’s suspension. This can be accomplished by replacing the factory struts with taller ones or by adding an extension to the existing struts.
Either way, lifted struts will give you a harsher ride than strut spacers because they don’t provide any cushioning.
So which is better? It really depends on what you’re looking for. If you want a smoother ride, go with strut spacers.
If you’re more concerned with looks or ground clearance, then lifted struts are the way to go.
Coil Spacers on Top of Suspension Lift
If you’re looking to add a suspension lift to your vehicle, you may be wondering if you need coil spacers. Coil spacers are often used in conjunction with suspension lifts, but they can also be used on their own. Here’s what you need to know about using coil spacers on top of a suspension lift.
When adding a suspension lift to your vehicle, the goal is to raise the body of the vehicle while keeping the wheels in the same position. This can be accomplished by adding spacers between the coils of the spring.
By doing this, you’ll effectively raise the ride height of your vehicle without affecting the travel or performance of your shocks or struts.
In some cases, coil spacers may be all that you need to achieve the desired ride height for your lifted vehicle. However, they can also be used in conjunction with other suspension components, such as taller shocks or different springs altogether.
If you’re unsure about which route to take, consult with a professional who can help you determine what will work best for your particular setup.
Installing coil spacers is generally fairly straightforward and can usually be done without having to disassemble any major components of your suspension system. However, as always, it’s best to consult with a professional before making any modifications to your vehicles suspension system.
Coil Spacer Lift Pros And Cons
Coil spacers are a type of suspension lift that is installed between the coil spring and axle on a vehicle. The main purpose of coil spacers is to provide additional ground clearance without changing the vehicles ride quality or suspension geometry.
Coil spacers are commonly used in conjunction with other suspension components such as shocks, struts, and control arms to achieve desired results.
One of the biggest advantages of installing coil spacers is that they are typically much less expensive than other types of suspension lifts. Coil spacers can also be installed relatively easily which makes them a popular choice for do-it-yourself enthusiasts.
Another advantage of coil spacers is that they generally don’t require any modifications to be made to the vehicles body or frame.
Although coil spacers offer many benefits, there are also some disadvantages to consider before installation. One downside of coil spacers is that they can potentially make your vehicle less stable off-road due to the increased height.
Additionally, if not installed correctly, coil spacers can put unnecessary stress on your vehicles suspension components which could lead to premature wear and tear.
Overall, coil spacers offer both advantages and disadvantages that should be considered before installation.
Do Strut Spacers Increase Ground Clearance?
If you’re looking to add a little bit of extra ground clearance to your vehicle, strut spacers are a great option. By adding spacers between your vehicle’s body and the suspension components, you can create some additional room and avoid potential hazards on the road. There are a few things to keep in mind when choosing strut spacers.
First, make sure that the spacers you choose are compatible with your vehicle’s suspension system.
Second, consider the thickness of the spacer – too thick of a spacer can negatively affect handling and steering.
Finally, be aware that installing strut spacers may require some modification to your vehicle’s existing suspension components.
Overall, adding strut spacers is a relatively easy way to add some extra ground clearance to your car or truck. With a little bit of research and careful planning, you can find the perfect set of spacers for your needs and get back out on the road safely.
Rubber Coil Spring Spacers Good Or Bad?
When it comes to suspension, there are a lot of different opinions out there about what works best. One of the most common questions is whether or not rubber coil spring spacers are a good idea. The answer to this question is a bit complicated.
There are both pros and cons to using rubber spacers in your suspension system. On the plus side, they’re relatively inexpensive and easy to install. They can also help improve the ride quality of your vehicle by absorbing some of the road vibrations before they reach the cabin.
On the downside, however, rubber spacers can degrade over time and may eventually need to be replaced. They can also make your suspension system less responsive, which can impact handling.
Ultimately, whether or not you use rubber spacers in your suspension system is up to you and what you prioritize for your vehicle.
What Do Coil Strut Spacers Do?
Coil spring spacers are devices that are placed between the coils of a coil spring suspension system. The purpose of coil spring spacers is to increase the space between the coils, which in turn increases the amount of suspension travel.
By increasing suspension travel, coil spring spacers can improve the ride quality and handling of a vehicle.
Additionally, coil spring spacers can be used to level out a vehicle that is “sagging” in the rear end.
Are Strut Spacers Any Good?
If you’re looking to add a little extra clearance to your vehicle, or simply want to give it a lifted look, then strut spacers might be the right choice for you. But what exactly are strut spacers and how do they work? Let’s take a closer look.
Strut spacers are basically just blocks that fit between your vehicle’s struts and the body of the car. By adding these spacers, you effectively raise the height of your vehicle by a few inches. This can be helpful if you’re trying to clear obstacles on the trail, or simply want your truck or SUV to have a more aggressive stance.
In addition to providing added clearance, strut spacers can also improve the handling of your vehicle. By stiffening up the suspension, they can help reduce body roll and make turns sharper. This is especially beneficial if you’ve got larger tires installed which can tend to make the ride feel less stable.
Overall, adding strut spacers is a relatively inexpensive way to improve both the look and performance of your ride.
What is a Coil Spacer?
A coil spacer is a small metal or plastic ring that is placed between the coils of a spring. Its purpose is to maintain a space between the coils so that they can move freely and not touch each other, which would cause them to bind. Coil spacers are commonly used in suspension systems, such as those found on cars and trucks.
They are also used in mattresses, furniture and a variety of other applications where springs are present.
Do Coil Spacers Affect Suspension?
If you’re looking to give your vehicle a little bit of a lift, coil spacers are a great and relatively inexpensive way to do so. But what exactly are coil spacers and how do they work?
In short, coil spacers are devices that fit between the coils of your suspension system in order to add height.
This extra height can be beneficial for a number of reasons. For example, if you frequently drive off-road or on uneven terrain, adding some extra clearance can help prevent damage to your vehicle’s undercarriage. Coil spacers can also be used to level out a vehicle that is sagging in the rear end due to an oversized load.
It’s important to note that while coil spacers will add height to your vehicle, they will not provide any additional suspension travel.
So if you’re looking for a way to increase the amount of ground clearance, coilovers or shocks are goingto be a better option. Coil spacers are typically made from aluminum or polyurethane and come in a variety of thicknesses ranging from 1/2″ all the way up to 2″.
The thicker the spacer, the more height you’ll gain. Installation is generally pretty straightforward and can usually be done with basic hand tools. However, depending on the size and location of the spacers, it may be necessary to make some modifications to your suspension components or bodywork in order for them to fit properly.
Overall, adding coil spacers is a quick and easy way to slightly modify the ride height of your vehicle without breaking the bank. Just keep in mind that they won’t provide any additional suspension travel or give you much leeway when it comes to tire size selection.
Also Read:
- How to Install Strut Spacers?
- Difference between Lower Strut Spacer Vs Upper Strut Spacer
- Do Throttle Body Spacers Actually Work?
- Do Wheel Spacers Affect Alignment?
- Throttle Body Spacer Pros And Cons & How Does Work?
- Difference between Bilstein 5100 Vs 6112 - April 15, 2023
- Difference between Bilstein 5100 Vs Fox 2.0 - April 15, 2023
- Difference between Bilstein B4 Vs B6 Ride Quality - April 14, 2023