Difference between Lower Strut Spacer Vs Upper Strut Spacer

A strut spacer is a component of a vehicle’s suspension system. There are two types of strut spacers: lower and upper. Each type has its own purpose and function.

Lower strut spacers are typically used to adjust the ride height of a vehicle. They are installed between the top of the coil spring and the bottom of the strut assembly. This raises or lowers the vehicle, depending on how the spacer is installed.

Upper strut spacers are used to adjust the camber of a vehicle’s wheels. They are installed between the top of the strut assembly and the body of the vehicle. This adjusts the angle of the wheel, which can improve tire wear and handling.

This is a question that I get a lot, so I thought I would write a blog post about it. The main difference between a lower strut spacer and an upper strut spacer is the height. A lower strut spacer will raise your car by about 1 inch, while an upper strut spacer will raise your car by about 2 inches.

There are also some differences in the way they are installed. Lower strut spacers are usually installed between the coil spring and the strut, while upper strut spacers are installed on top of the strut. Upper spacers also require you to remove the factory top hats from your struts, which can be a bit of a pain.

Overall, both types of spacers will give you a similar ride quality and performance, but if you’re looking to raise your car more than an inch or two, then upper spacers are the way to go.

Can You Put Spacers on Lifted Struts?

If you’ve lifted your car, you may be wondering if you can put spacers on the struts. The answer is yes, but there are a few things to keep in mind. First, the amount of lift will determine how much space you need to add.

If you’ve only lifted the car a few inches, then a small spacer should suffice. However, if you’ve lifted it significantly, then you’ll need a larger spacer. Second, keep in mind that adding spacers will change the geometry of your suspension.

This means that the ride quality and handling characteristics will change as well. You may find that the car feels bouncier or that it doesn’t handle as well as it did before. If this is the case, then you can experiment with different size spacers until you find one that provides the ride and handling quality that you’re looking for.

In general, adding spacers to lifted struts is perfectly fine and is often necessary to achieve proper clearance. Just be aware of the potential trade-offs in terms of ride quality and handling and make sure to experiment until you find the right setup for your car.

Difference between Strut Spacers Vs Lifted Struts

If you’re looking to improve the suspension on your car, you may be wondering whether to go with strut spacers or lifted struts. Both options have their pros and cons, so it’s important to understand the difference between them before making a decision.

Strut spacers are designed to raise the suspension of your car without changing the factory strut assembly.

This means that they’re a relatively simple and inexpensive way to achieve a mild lift. However, because they don’t replace the entire strut assembly, they can’t offer as much of a lift as lifted struts.

Additionally, strut spacers can sometimes cause issues with alignment and might not provide as much protection from off-road elements as lifted struts.

Lifted struts, on the other hand, replace the factory strut assembly with a taller one that’s been specifically designed for lifting. This provides a more significant lift than strut spacers and also offers improved protection from off-road elements.

However, lifted struts are typically more expensive than strut spacers and can require more extensive installation.

2 Inch Leveling Kit Loaded Strut

If you own a truck or SUV, then you’ve probably considered getting a leveling kit. A leveling kit is designed to level out your vehicle so that it sits evenly. This is especially helpful if you’ve added bigger tires or suspension components, as they can throw off the factory height and cause your vehicle to sit unevenly.

There are many different types of leveling kits on the market, but one of the most popular is the 2 inch leveling kit with loaded struts. This type of kit is designed to level out your vehicle while also providing a comfortable ride. The struts are already loaded with nitrogen gas, which helps to improve the overall quality of the ride.

Installing a 2 inch leveling kit with loaded struts is relatively easy and can usually be done in about an hour or two.

If you’re not comfortable doing it yourself, then there are plenty of reputable shops that can do it for you. The cost of these kits varies depending on the brand and where you purchase them, but they typically range from $200-$500.

So, if you’re looking for an easy way to level out your truck or SUV, then a 2 inch leveling kit with loaded struts may be right for you. Just be sure to do your research and choose a reputable brand that offers good customer support in case you have any issues during installation.

How Do Strut Spacers Work?

Strut spacers are devices that are installed between a vehicle’s suspension strut and the body of the car. The purpose of strut spacers is to provide additional clearance between the two components, which can improve suspension articulation and allow for greater wheel travel.

In some cases, strut spacers may also be used to adjust the ride height of a vehicle.

Most commonly, strut spacers are made from aluminum or polyurethane. Aluminum spacers are typically less expensive than polyurethane Spacers, but they can cause increased noise and vibration due to their metal-on-metal contact with the struts.

Polyurethane spacers, on the other hand, provide a more cushioned interface between the struts and body of the car, resulting in reduced noise and vibration.

When choosing strut spacers, it is important to select those that are specifically designed for your make and model of vehicle.

Additionally, be sure to check that the chosen spacer thickness will not result in any interference issues with other suspension components or tire/wheel fitment. Installation of strut spacers typically requires basic automotive tools and knowledge;

however, if you are unsure about how to properly install them, it is always best to consult with a professional mechanic or installer.

How Much Lift Does a Strut Spacer Give?

Strut spacers are a popular way to add a little extra lift to your vehicle, and they can be had for a relatively inexpensive price. But just how much lift do they actually provide? The answer depends on the size of the spacer you’re using.

A 1-inch spacer will typically provide around 1 inch of additional lift, while a 2-inch spacer will give you closer to 2 inches of lift. So, if you’re looking to add a significant amount of height, you’ll need to go with larger spacers. It’s important to note that strut spacers only work with vehicles that have struts in the front suspension.

If your vehicle has coil springs in the front (as many newer ones do), then adding strut spacers will not provide any additional lift. If you’re thinking about adding some strut spacers to your ride, be sure to check out our selection here at Suspension Connection!

How Much Lift Does a 25Mm Strut Spacer Give?

If you’re looking to add a little bit of extra height to your vehicle, a 25mm strut spacer is a great option. These spacers are designed to fit between your car’s struts and the body of the car, effectively lifting it up by 25mm.

This can be a great way to improve the look of your car, as well as giving you some extra clearance for off-road driving or other activities.

In terms of actual performance, a 25mm strut spacer will typically add around 10-15% more spring travel to your suspension. This can help with things like bumps and potholes, as well as giving you a little bit more ground clearance.

Overall, adding a 25mm strut spacer is a relatively simple way to improve the ride and handling of your car without making any major changes.

How Much Lift Will a 10Mm Strut Spacer Give?

If you’re looking to add a little extra height to your vehicle, then a 10mm strut spacer might be the way to go. But how much lift will it actually give you? In general, a 10mm strut spacer will give you about 20-30mm of additional lift.

However, this will vary depending on the make and model of your vehicle. So, it’s always best to check with the manufacturer or an expert before making any decisions. If you do decide to install a 10mm strut spacer, be prepared for a slightly rougher ride.

This is because the spacers can change the suspension geometry and affect the way your shocks and struts work. But if you’re just looking for a little bit of extra height, then they should do the trick!

How Much Lift Does a 32Mm Strut Spacer Give?

Adding a 32mm strut spacer to your vehicle will give you an additional amount of lift. This is due to the fact that the spacer takes up space between the top of the strut and the bottom of the vehicle, which effectively raises the entire vehicle.

The amount of lift will vary depending on the specific model of your vehicle and how much clearance there is to begin with.

In general, however, you can expect an extra 2-3 inches of ground clearance with a 32mm spacer.

Conclusion

In order to make a decision on which type of spacer to use for your vehicle, it is important to understand the difference between lower strut spacers and upper strut spacers. Lower strut spacers are designed to be installed in between the bottom of the coil spring and the top of the strut assembly.

This will raise the vehicle up by a certain amount, depending on the thickness of the spacer.

Upper strut spacers are designed to be installed on top of the factory upper spring seat and under the coil spring. This will also raise your vehicle up, but not as much as a lower spacer.

In most cases, a combination of both types of spacers will be needed in order to achieve the desired height.