How to Install Strut Spacers?

If your vehicle has a strut-type suspension, you can install strut spacers to give it an additional 2 to 3 inches of ground clearance. Strut spacers are available at most auto parts stores and online retailers.

To install them, you’ll need a few tools:

First, jack up the front of your vehicle and support it on jack stands.

Then, remove the wheel on the side you’re working on.

Next, disconnect the strut from the steering knuckle and lower control arm.

Finally, insert the spacer between the top of the strut and the bottom of the steering knuckle, then reassemble everything in reverse order.

• Measure the thickness of your currentstrut spacers and compare it to the desired thickness of spacer you want to install
• Select appropriate sized bolts to secure the strut spacer in place
• It is important that the bolt is long enough to go through both the spacer and the strut mount, but not so long that it protrudes out the other side and hits the tire
• Remove one bolt at a time from your current struts, replacing it with a bolt of equal or longer length through the new spacer and into the strut mount
• Repeat this process for all four bolts on both front struts
• Once all four spacers are installed, check to make sure that they are tightened properly and there is no play in them before taking your vehicle for a test drive

Do Strut Spacers Increase Ground Clearance?

If you’re looking to increase the ground clearance on your vehicle, one option is to install strut spacers. Strut spacers are installed between the struts and the body of the car, and they effectively raise the height of the struts. This in turn raises the height of the car, giving you more clearance.

There are a few things to keep in mind if you’re considering installing strut spacers. First, they will likely change the ride quality of your car – it may be rougher or bouncier than before.

Second, depending on how much ground clearance you’re looking to gain, you may also need to make other adjustments like installing taller tires.

Finally, because strut spacers change the geometry of your suspension, it’s important to have them installed by a professional who can ensure that everything is done correctly.

Overall, installing strut spacers can be a relatively simple and inexpensive way to increase ground clearance on your vehicle. Just be sure to do your research beforehand and have them installed by a qualified professional.

Universal Strut Spacers

If you’re looking to give your vehicle a lift, or simply want to level out its appearance, you may be considering the addition of strut spacers. Strut spacers are devices that attach to the top of your struts in order to create additional space between the strut and the body of your vehicle.

This extra space can provide a number of benefits, including a more aggressive stance, increased clearance for larger tires, and improved handling.

There are two main types of strut spacers: universal and model-specific. Model-specific strut spacers are designed specifically for certain vehicles, while universal strut spacers can be used on most any vehicle. Universal strut spacers are typically less expensive than model-specific ones, but they may not provide as snug of a fit.

When choosing strut spacers, it’s important to consider both the height and width of the spacer. The height will determine how much lift is added to your vehicle, while the width will affect how far apart the struts sit from one another.

You’ll also want to make sure that the bolt pattern on the spacer matches up with that of your struts; otherwise, you won’t be able to install them properly.

Once you’ve selected the right set of strut spacers for your vehicle, installation is relatively straightforward. Most kits come with all necessary hardware and instructions. If you’re not comfortable doing it yourself, many auto shops offer installation services for an additional fee.

Strut spacers can be an easy and effective way to improve both the look and performance of your vehicle without breaking the bank.

Strut Spacers Good Or Bad

When it comes to suspension upgrades, one of the most popular options is installing strut spacers. But are they really effective? Let’s take a closer look at strut spacers and see if they’re worth the investment.

Strut spacers are designed to raise the body of your vehicle, giving you more clearance and improving off-road performance. They can also be used to level out a vehicle that’s been lowered or has an uneven stance.

In some cases, strut spacers can even improve ride quality by reducing harshness from bumps and potholes.

So, do strut spacers actually work? The answer is yes… but there are some things to keep in mind.

First, while they will give you more clearance, they may also reduce ground clearance in certain situations (like when driving over tall curbs).

Second, if you’re planning on using them for leveling purposes, make sure that you get the correct size for your application; too big or too small of a spacer can throw off your suspension geometry.

Finally, be aware that installation of strut spacers may require some modifications to your vehicle (like longer bolts), so it’s always best to consult with a professional before undertaking any work yourself.

Overall, strut spacers can be a great way to improve the look and performance of your vehicle – just be sure to do your research beforehand!

Strut Spacer Lift

Installing a strut spacer lift is one of the easiest ways to give your vehicle some extra height. It’s a relatively inexpensive way to achieve a little bit more ground clearance, and it can be done in a matter of hours.

In this article, we’ll show you how to install a strut spacer lift on your own vehicle. The first thing you’ll need to do is jack up your vehicle and remove the wheels. Once the wheels are off, you’ll be able to access the struts.

On most vehicles, there are two bolts holding each strut in place. Remove these bolts and then carefully remove the struts from the vehicle.

Next, take your spacers and place them on top of the existing strut mount. Make sure that the spacers are evenly spaced and secure them in place with the bolts that you removed earlier.

Now, simply reinstall the struts and lower your vehicle back down to the ground. That’s all there is to it! If you’re looking for an easy way to add some extra height to your vehicle, a strut spacer lift is definitely worth considering.

It’s quick, easy, and relatively inexpensive – what more could you ask for?

Are Strut Spacers Easy to Install?

If you’re looking to give your car a little extra lift, strut spacers are a relatively easy way to do it. Most people can install them in about an hour or two, with just basic hand tools. There are a few things to keep in mind before installation, though.

First, make sure that the spacers you buy are compatible with your car’s suspension. Different cars have different types of struts, so it’s important to get the right size and type of spacer.

Second, take some time to clean off all the old grease and grime from your struts before installing the new spacers. This will help ensure a tight fit and prevent any rattling down the road.

Other than that, installation is pretty straightforward. You’ll just need to remove the old strut assembly from your car (be careful not to lose any small parts!) and then bolt on the new spacers in its place.

Once they’re secure, put everything back together and enjoy your newly lifted ride!

Do Strut Spacers Affect Ride?

Strut spacers are a popular way to slightly lift the front of a 2wd vehicle, and they can be used on coil spring or torsion bar suspension systems.

While a small amount of lift is achieved, it’s important to know that this does not come without trade-offs. The main downside to using strut spacers is that they will affect ride quality.

This is because the spacer essentially acts as a wedge, raising the ride height at one end while leaving the other end untouched. This unevenness creates a situation where the vehicle is no longer level, which in turn causes issues with handling and braking.

In short, while strut spacers may give your truck or SUV a slight lift, they will also negatively impact how it drives.

How Do You Install a Strut Spacer Leveling Kit?

If you’re looking to add a little bit of height to your truck or SUV, one option is to install a strut spacer leveling kit. This relatively simple and straightforward process can be completed in a few hours with just some basic tools. Here’s everything you need to know about installing a strut spacer leveling kit.

Before we get started, it’s important to note that while this type of leveling kit will add some height to your vehicle, it’s not going to dramatically change the look or feel. If you’re hoping for a more significant change, you’ll likely need to go with a different option like a body lift kit.

With that said, let’s take a look at what you’ll need and how the process works.

What You’ll Need: – A set of coil spring compressors (this is the most important tool) – A socket wrench and various sockets (depending on your vehicle)

– A torque wrench – An impact gun (optional but helpful) – A drill (optional but helpful)

How It Works: The first step is to disconnect the negative battery terminal so you don’t accidentally electrocute yourself during the process.

Next, use the coil spring compressors to compress the springs on each side of the vehicle.

Once they’re compressed, remove the nuts/bolts holding them in place and carefully remove them from the vehicle. At this point, you should be able to see the strut assembly. Now it’s time to install the spacer onto the top of each strut assembly.

In most cases, there will be an existing hole that lines up perfectly with one on the spacer. If not, you may need to drill a new hole (which is why having a drill handy can be helpful). Once aligned, secure each spacer in place using bolts/nuts. Be sure not to overtighten as this could damage the threads.

Finally, reattach each spring using coilspring compressors (if necessary), then reconnect your battery and test drive!

Where Do Strut Spacers Go?

Strut spacers are devices that are installed between a vehicle’s strut and the body of the car. The purpose of strut spacers is to provide additional clearance between the two components, which can improve suspension performance and allow for better tire clearance.

In some cases, strut spacers may also be used to adjust the ride height of a vehicle.

Conclusion

If your vehicle isn’t riding as smoothly as it used to, or you notice that the front end seems to be sagging, then it might be time to install strut spacers. Strut spacers are an easy and affordable way to improve the suspension on your car, truck, or SUV.

In most cases, all you need is a few basic tools and an afternoon to get the job done.

Here’s a step-by-step guide on how to install strut spacers:

1. Jack up your vehicle and remove the wheels. This will give you better access to the struts.

2. Use a spring compressor to decompress the springs on the struts. This will make it easier to remove them later on.

3. Unbolt the top mount from the strut assembly and carefully remove it.

The spring will still be under tension, so use caution when removing the top mount.

4. Install the spacer onto the shaft of the strut assembly where the top mount was previously attached. Make sure that the spacer is securely in place before proceeding any further.

If necessary, use a mallet or hammer to lightly tap it into place until it’s snug against the shaft of the strut assembly.