How to Fix Squeaky Strut Mounts?

If your car has squeaky strut mounts, there are a few things you can do to fix them. First, check to see if the mounts are loose. If they are, tighten them up with a wrench.

If the problem persists,
you may need to replace the mounts. To do this, first remove the old ones by unbolting them from the car. Then, bolt on the new ones in their place.

Once they’re tight, test out your car to see if the squeak is gone.

  • Open the hood of your vehicle and locate the strut mounts
  • With a socket wrench, remove the bolts that secure the strut mount to the vehicle
  • Remove the old rubber bushing from the strut mount using a pry bar or similar tool
  • Install a new rubber bushing in the strut mount and reinstall it onto your vehicle
  • Torque the bolts that secure the strut mount to your vehicle according to manufacturer specifications

Best Lubricant for Squeaky Suspension

If your car’s suspension is making noise, it might be time to add some lubricant. But what kind of lubricant should you use? There are many different types of lubricants available, but not all of them are suitable for use on car suspensions.

Some lubricants can actually damage suspension components. The best type of lubricant to use on a squeaky suspension is a silicone-based spray. Silicone spray will not damage suspension components and it will help to quiet the noise.

To apply the silicone spray, simply spray it onto the affected areas of the suspension. You may need to apply several coats in order to achieve the desired results. Allow the spray to dry completely before driving your car.

How Do I Stop My Struts from Squeaking?

If your struts are squeaking, there are a few things you can do to try and fix the problem. First, check to see if the struts are properly lubricated.

If they’re not, you can try lubricating them yourself with a silicone-based spray or gel. You can also try tightening the bolts that hold the struts in place.

If neither of these solutions works, you may need to replace your struts.

Can You Lubricate Strut Mounts?

Strut mounts, also called strut bearings or strut bushings, are the rubber or polyurethane cups that isolate a vehicle’s struts from contact with the chassis.

Most newer vehicles have strut mounts with integral bearing plates – these not only provide a more secure attachment for the strut to the vehicle, but they also allow the strut to pivot during suspension travel. This helps keep tire alignment in check and prolongs wheel bearing life.

While it is possible to lubricate a strut mount, it is generally not necessary or recommended. The sealed bearings within most modern mounts do not require lubrication and should never be opened.

Additionally, adding lubricant to a mount can actually cause premature wear by attracting dirt and debris.

Can You Put Wd40 on Struts?

It’s not advisable to put WD40 on struts. While WD40 is a lubricant and can help to protect metal surfaces from rust and corrosion, it’s not designed for use on suspension components. Over time, the WD40 can actually damage the seals on the struts, causing them to leak.

Why is My Strut Squeaking?

If you’re hearing a squeak coming from your car’s suspension, there’s a good chance it’s the struts. The strut is responsible for providing support for the vehicle body, and helps to dampen bumps in the road.

Over time, however, they can become worn down and start to make noise.

There are several reasons why your struts might start to squeak. First, the bushings that connect the strut to the vehicle body can wear out and loosen up over time. This can allow movement between the two parts, which will create noise as they rub against each other.

Additionally, the metal coil springs inside the strut can also become damaged or corroded, causing them to rub against each other and create a squeaking sound.

If you suspect your struts are starting to fail, it’s important to have them checked out by a professional mechanic. They can inspect the components of your suspension and let you know if they need to be replaced.

In some cases, simply lubricating the moving parts of your suspension can quiet down a squeaky strut. However, if there is significant damage, replacement may be necessary.


If your car has squeaky strut mounts, don’t worry – there’s an easy fix! All you need is a socket wrench and some WD-40.

First, loosen the bolts that hold the strut mount to the body of the car.

Then, spray some WD-40 onto the mount itself.

Finally, retighten the bolts and enjoy a quiet ride!

Danyl Dmitry

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *