Coilovers are a type of suspension system that combine the coil spring and shock absorber into one unit. Adjusting the height on coilovers is a fairly simple process that can be done with a few basic tools.
First, you will need to locate the adjustment collar on the coilover. This is usually located at the bottom of the coilover, near the mounting point.
Next, use a spanner wrench or a socket set to turn the adjustment collar clockwise to raise the height of the vehicle or counterclockwise to lower it. Be sure to make small adjustments at a time, and check the height of the vehicle after each adjustment to ensure that it is level.
Once you have achieved the desired height, be sure to tighten the adjustment collar securely to ensure that it stays in place.
Adjust Height on Coilovers for Beginners
- Park your vehicle on a level surface and engage the emergency brake to prevent it from rolling while you work
- Place a jack under one side of the vehicle and raise it until the wheel is off the ground
- Do not fully remove the tire from the ground, as this can cause instability
- Locate the coilover adjustment knob on top of the shock assembly
- This knob controls how much preload is on the spring, which in turn affects ride height
- Rotate the knob clockwise to add preload and raise ride height, or counterclockwise to reduce preload and lower ride height
- For most applications, each full rotation of the knob will result in a 1/4-inch change in ride height
- Repeat Steps 2-4 for each corner of the vehicle until you have achieved your desired ride height
How to Adjust Coilovers for Smooth Ride ?
We all know that a smooth ride is important for both our safety and our comfort. But what many people don’t realize is that coilovers play a big role in achieving this.
By properly adjusting your coilovers, you can achieve a much smoother ride without sacrificing performance or handling.
Here’s how:
1. First, make sure that your coil overs are properly inflated. This may seem like a no-brainer, but it’s actually very important.
If your coilovers are under-inflated, they will bottom out more easily and cause a jarring ride. On the other hand, if they’re over-inflated, they’ll be too stiff and will make the car feel bouncy. The goal is to find the happy medium between these two extremes.
2. Take a look at your spring rates. If you’re not familiar with spring rates, they basically determine how much force is required to compress your springs by a certain amount. In general, higher spring rates will result in a firmer ride while lower spring rates will provide a softer ride.
Again, you’ll want to strike a balance here depending on your personal preferences and driving style.
3 . Pay attention to your damper settings .
These control how quickly your shocks rebound after being compressed. If they’re set too low , the car will feel mushy and unresponsive; if they’re set too high , the car will bounce around excessively. Once again , finding the perfect middle ground is key .
By following these simple tips , you can greatly improve the quality of your ride without sacrificing performance or handling. So get out there and start adjusting those coilovers !
How High Can You Raise Coilovers ?

Coilovers are a type of suspension that allows for a lower ride height and increased control over spring rates and damping.
Most coil-overs are adjustable, so you can dial in the perfect ride for your needs. But how high can you actually raise them?
In general, though, most cars can be raised by about 2-3 inches with coilovers. This is enough to improve handling and give you a little bit of extra clearance for obstacles on the road.
Of course, if you’re planning on taking your car off-road or doing any serious racing, you’ll want to consult with an expert to find out what’s safe and possible for your particular setup. But for most people, raising their coil overs by a couple of inches will provide plenty of benefits without any major risks.
How to Adjust Coilover Dampening ?
The main advantage of coilovers is that they offer adjustable dampening, which allows you to fine-tune the ride quality of your car.
There are two ways to adjust coilover dampening: preload and rebound.
Preload is the amount of tension on the coil, and it affects how much the suspension compresses when weight is applied.
Rebound is the amount of force required to extend the coil, and it affects how quickly the suspension returns to its original position.
To adjust preload, you’ll need to unscrew the retaining nut at the top of the coilover. This will allow you to rotate the body of the coilover, which will either increase or decrease preload. To adjust rebound, you’ll need to turn the knob at the base of the coilover.
This will either increase or decrease rebound dampening. Keep in mind that changing these settings will affect how your car handles, so it’s important to experiment until you find a setup that works for you.
Can you adjust ride height with coilovers on car?

Yes, one of the main advantages of coilovers is the ability to adjust the ride height of a vehicle. By adjusting the height of the coilover, you can lower or raise the vehicle to your desired level. This can be done by turning the adjustment collar, which is usually located at the bottom of the coilover near the mounting point.
This allows you to fine-tune the suspension and achieve the perfect balance between performance and appearance. It is important to note that adjusting the ride height can also affect the suspension’s handling and alignment, so it is recommended to do it gradually and check the car’s alignment after each adjustment.
Do you have to remove coilover to adjust height?
It is generally not necessary to remove the coilover from the vehicle in order to adjust the height.
Most coilovers have an adjustment collar that can be accessed and turned with a spanner wrench or a socket set while the coilover is still installed on the vehicle. This collar is usually located at the bottom of the coilover near the mounting point.
However, depending on the specific design of the coilover and the vehicle, it may be difficult to access the adjustment collar or make the necessary adjustments without removing the coilover.
In such cases, it is best to refer to the manufacturer’s instructions or seek professional help.
How to Adjust Coilover Preload ?

Coilovers are a type of suspension that allows for adjustability and customizability when it comes to setting ride height.
Preload is one aspect that can be adjusted in order to fine-tune the feel of the ride.
When it comes to adjusting preload, there are two main ways to do it: via the spring perch or by adjusting the damper. Adjusting preload via the spring perch is the more common method, as it’s typically easier and doesn’t require any disassembly.
To adjust preload via the spring perch, simply turn the knob or lever in either direction until you’ve achieved the desired amount of preload.
You’ll know you’ve reached the desired amount when there’s no more free play in the system and resistance is felt when trying to turn further.
If you’re wanting to make more drastic changes or achieve a very specific level of preload, then adjusting via the damper is likely going to be your best bet. This method requires some disassembly, but isn’t overly complicated.
Can You Adjust Ride Height With Coilovers on Car?
Yes, you can adjust ride height with coilovers on your car. This is done by adjusting the preload on the coilover spring. By Adjusting the preload, you are effectively changing the rate at which the spring compresses and expands.
This will in turn change the ride height of your vehicle.
How Do You Adjust the Height of a Rear Coilover?
First, you’ll need to know the spring rate and travel of your coilover. This information can be found in the manufacturer’s specifications.
Once you have this information, you can start adjusting the height of your rear coilover. The most common way to adjust the height of a rear coilover is by using spacers. Spacers are available in different thicknesses and sizes, so you’ll need to select the right size for your application.
You’ll also need to make sure that the spacer is compatible with your coilover system. If unsure, consult with a professional or the manufacturer. To install spacers, first remove the upper mount from the chassis.
Next, place the spacer on top of the spring perch and reinstall the upper mount. Make sure that everything is secure and tight before moving on. Once everything is back in place, simply cycle through your suspension to check for clearance issues.
If all looks good, you’re ready to hit the road!
Do Raising Coilovers Make Your Ride Smoother?
Some say that it does, as it lowers the center of gravity of the car and thus improves handling. Others claim that it actually makes the ride rougher, as the suspension has to work harder to keep the car level.
it really depends on a number of factors. For example, if you raise your coilovers too much, then yes, it will probably make your ride rougher as the suspension will have to work harder.
However, if you raise them just enough so that the center of gravity is lowered without making the suspension work overtime, then you may well find that your ride is smoother. It really varies from car to car and setup to setup, so you’ll just have to experiment to see what works best for you.
- Difference between Bilstein 5100 Vs 6112 - April 15, 2023
- Difference between Bilstein 5100 Vs Fox 2.0 - April 15, 2023
- Difference between Bilstein B4 Vs B6 Ride Quality - April 14, 2023