Can You Use Wd40 on Spark Plugs?

Yes, you can use WD-40 on spark plugs. Just make sure to wipe off any excess before starting the engine.

  • Unscrew the spark plug from the engine using a spark plug wrench
  • Remove any debris or deposit build-up on the spark plug with a wire brush
  • Coat the threads of the spark plug with WD40
  • Screw the spark plug back into the engine by hand to avoid cross-threading
  • Use the spark plug wrench to tighten the spark plug until it is snug

How to Loosen Spark Plugs?

If your engine is having trouble starting, it may be time to check the spark plugs.

Over time, spark plugs can become fouled or damaged, which can cause them to misfire. In some cases, you may be able to clean or replace the spark plugs to fix the problem.

To remove a spark plug, you will need a socket wrench and a spark plug socket. Mostsocket wrenches come with an adapter that allows you to use either type of socket. Simply attach the appropriate socket to the wrench and loosen the Spark Plug by turning it counterclockwise.

You may need to use a little force to loosen stubborn plugs. Once the plug is loose, carefully remove it from the cylinder head and inspect it for damage. If the electrode is worn or damaged, you will need to replace the plug.

Otherwise, try cleaning the plug with a wire brush before reinstalling it. Make sure not to over-tighten the plug when reinstalling it – hand-tighten only until snug.

What Can I Use to Lubricate My Spark Plugs?

If your spark plugs are dry, you can use a little bit of WD-40 or oil to lubricate them. Just be sure not to overdo it, or you could end up making a mess.

How Do You Clean Spark Plugs With Wd-40?

It’s no secret that WD-40 can be used for a variety of tasks around the house – from loosening rusty bolts to protecting metal from corrosion. But did you know that WD-40 can also be used to clean spark plugs?

Here’s how:

1. Remove the spark plug from the engine.

2. Spray WD-40 onto the spark plug threads and into the gap between the electrode and the side of the plug.

3. Use a wire brush or toothbrush to scrub away any debris or build-up on the electrode and inside the gap.

4. Wipe away any excess WD-40 with a rag.

5. Reinsert the spark plug into the engine and tighten it securely.


If you’re wondering whether you can use WD40 on your spark plugs, the answer is yes! WD40 is a versatile product that can be used for many different things, including cleaning and lubricating your spark plugs. Simply spray some WD40 onto a clean cloth and wipe down each spark plug to remove any dirt or debris.

Then, use a small amount of WD40 to lubricate the threads of each spark plug. This will help keep them in good condition and prevent rusting.

Danyl Dmitry

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *